3 Growlers Craft Beer Show: Third Street Jack'd Up Autumn Ale

Adventures of a Beginning Homebrewer: Drink It, Don't Dump It!

It’s been a busy summer for this guy! I can’t complain as I have been busy with ALL fun stuff! Traveling Wisconsin with my band, Marked 4 Deletion, heading to far away beer establishments, hitting up beer festivals, and occasionally just relaxing at my cabin. It’s been great, but with being busy comes sacrifice. The schedule has to give somewhere! Sadly, I accidentally sacrificed beer....

I had brewed a couple beers this spring. I kind of lost track at how long they were in my little brewery and didn’t bottle them when I should have. That should be no problem right? As I learned with the raspberry wheat (click here) I know that I can sit on these for a bit and everything will be A-ok..... That is unless you fail to notice that the fluid in the airlock dries up, rendering the air lock useless!


That’s right, I exposed ten gallons of beer to the outside contaminated world! TEN GALLONS!!! And yep, it got infected. So time to dump it down the drain, right? Whoa, whoa, whoa... Wait just a minute here. That is a lot of beer. There has to be a way to save it.

(Infected Beer)

The good news for a slacker like me is that there IS a way to save it! Campden tablets. I discovered these little lifesavers when I had a batch of nut brown contaminated (not due to slacking). Basically these little guys kill everything and give your beer a final fighting chance.

Here’s how you save your beer. You will need to use one tablet per gallon of beer. Just crush em up and add them to your beer (make sure to re-sanitize an airlock). Now you will need to wait a week or two for the Campden to do its work.

Keep in mind that Campden will also kill your yeast. So you need to go to the store and get another yeast packet if you are going to bottle condition/carbonate. I know this is a few more bucks out of pocket, but isn’t 5 gallons of beer worth a couple more dollars? Pitch the yeast, wait another couple weeks and bottle the beer (don’t wait a couple weeks and you will have exploding bottles I am willing to bet!)

(Campden Tablets & Sanitizer)



A couple things about saving your beer with Campden tablets. Although your beer is totally save to drink, you may have some very subtle off flavors. These off flavors increase in time, so you need to drink your saved beer sooner rather than later. Aging a beer saved with Campden is an exercise in futility.... Unless you like drinking gross things.

The one time I have used this before in the above mentioned Nut Brown (I called it Slutty Nut.... because it had an infection, but luckily it cleared up with a bit of medicine!) the results were great. Weirdly it was one of the best beers I have made. I have even had requests for me to make it again! Hopefully these two turn out the same way.

If you ever have an infection in your beer, don’t just automatically dump it. Instead let your beer at least try with Campden Tablets!

Cabin Craft Beer Review: Clown Shoes Genghis Pecan Porter (2013)

For a long time Minnesota was behind the times when it came to Craft Beers.  We had Schell’s, Summit, and a few other rebels, but for the most part we were hunkered down in macro-beer-land.  As such few craft brewers from other states didn't send their wares here.  Sure you had your brave ones like Pyramid, Boulevard, Leinenkugels, and semi-macro/semi-craft Sam Adams, but at the end of the day the most adventurous of that lot was Pyramids Apricot Wheat.  Our craft beer scene was stagnant.  But then in the early 2000s that began to change.  We wanted more, nay we demanded more from our craft beer and if brewery greats like Stone and Yuengling wouldn’t come here, then by golly we’ll brew out own.  Surly introduced us to hopped up IPAs that can match Stone any day, and might even have a bigger cult following!  Schell’s produced Grainbelt Nordeast, a beer very similar in style to Yuengling Original!  If they wouldn’t come to us, dang it someone stepped up to brew it!  Recently I have been seeing a trend on the beer shelves around the Twin Cities.  More and more well-known breweries are starting to penetrate our shelves.  I take this as a sign that we are becoming a well-known Craft Beer Loving State!  In the last year we have added Oskar Blues, Green Flash, and Clown Shoes to our available lines of beer!  It’s exciting to see these brewing legends start to take us craft beer drinkers seriously. 

Recently I got the opportunity to pick up one of the last bottles of 2013 Genghis Pecan from Clown Shoes, out of Ipswich, MA.  I was saving this one for a special occasion, and it ended up at the Cabin with me.  So welcome to Minnesota!  Here’s a review and toast to making a GREAT decision to come here!

 First off the beer poured thick, and had a quick forming foamy brown head.  The head cascaded upwards as it poured into the shaker pint.  The first smell gave off the aroma of light coffee, and almost no hop presence.  I noticed it was dark, I shined a light through it, only a hint of red came out on the other side.  As the head settled down I took the first sip.  It had a medium to thick mouth-feel.  It was smooth with strong roasted coffee notes, and it lingered with a fresh pecan flavor and mellow bitterness.   It was kind of a chilly night, so it was a perfect after dinner beer.  I honestly expected more sweetness out of a beer labeled as "pecan pie porter", but that fact that is was more roasty was not a let down by any stretch of the imagination.  Over all a very tasty beer, and great for after dinner whether you are a fan of coffee or toasted pecans.  If pairing a meal to match with this beer I would pick a slow roasted pork loin, or pan fried mushrooms.

Overall I give this beer **1/2 stars (Excellent)

That's all for this review.  Time to go out and enjoy the lake!  Prost!

Beerploma Craft Beer Tour: Cigar City, Miami Brewing, and more from Florida

I love getting to travel to work.  Well let me clarify.  I miss my family and friends...but I get a hotel room all to myself, get to meet new people, get to see new things and try new foods, and most of all I get a free trip to try new beers.

My recent trip to Miami, FL was no exception.  I got to go with a great crew, who were very adventurous about craft beers.  And of course I went on the hunt for the Legendary Brewery:  Cigar City!

Our first beer on the list was from the Florida Beer Co. Florida Lage:

The thick white foamy head topped the light reddish color of this beer.  It had a piney aroma.  The taste was low on malt flavors and high on the piney saaz hops.  It was a very solid beer that reminded me of many German pilsners, especially Jever.  Over all it was a good solid beer.  On my scale of 1-3 stars I gave this * (Good). 

Next up on our list is OPB's Orange Blossom Pils:

I have heard a lot of good things about this beer, even reading it in many of my Beer Suggestion books.  I had to give the beer a try.  Like the Florida Lager it had a very clean piney aroma.  It was almost identical in color to it as well.  The taste is what sets these two beers apart.  This one had low hops in the in the flavor, slight sweetness.  I picked up a little bit of the honey, but I kind of would have liked more.  Overall another solid brew earning a rating of *(Good)

Next on our list are two beers from Miami Brewing:  Vice IPA and Gator Tail Brown Ale

Vice IPA:  This dark reddish IPA started with a thick foamy white head.  It had a really thick caramel aroma.  It had a medium mouthfeel and left a piney/citrus after taste.  The malty caramel came on strong through out the tasting.  This is very much done in the British Styles of IPAs.  It was a solid hit and perfect for sitting pool side on a hot spring day.  It scored a *1/2 (Very Good) rating.

Gator Tail Brown Ale:  This was the sleeper hit of all the beers I tasted on this trip.  It pours thick and foamy with a tan head.  It had a medium mouth feel.  It was light on carbonation.  It had a really robust sweet coffee aroma.  It was the heaviest beer I drank, but still light enough for the Florida weather!  Great coffee flavor, and a very well rounded beer.  Fans of porters would enjoy this!  It scored **1/2 (Excellent).

And last but not least we have two beers from the legendary Cigar City:  Florida Cracker Belgian, and Hotter then Helles Lager.

Hotter then Helles Lager:  This brewery lives up to the hype!  This hazy gold elixir had a soft fruity apple aroma.  It carried over into the flavor.  Light biscuit notes from the malts.  I have been to Germany many times, and this would go right up their with the best of the German Helles, easily.  Rating is **1/2 (Excellent)

Florida Cracker:  This hazy straw gold brew poured light with a thick foamy head.  It had a great spicy aroma., most notably a coriander scent.  Very well carbonated, light mouth feel.  It had a spicy taste with a hint of cloves.  This beer is enough to make you forget that Blue Moon even exists.  Quite possibly the best Belgian Wheat beer I have ever had.  Rating:  ***(Awesome)

I am looking forward to getting down there again to partake in even more of these really awesome beers!  Until next time keep those beer mugs full!  PROST!

Rise of the Beer Baron Pt 5: A Homebrewer Is You!

It's been a while since I blogged about the beginnings of my love for craft beer.  So when we last left off I had just gotten my first homebrew kit.

 







This was my introduction to how beer was made.  Even with the first batch I learned A LOT about the mechanics of brewing.  Here is a quick list of lessons that I learned:

1. Brewing the beer is easy, it's the pre-cleaning, post-cleaning, and bottling is hard.
2. You will learn to clean EVERYTHING.
3. Repeat step 2 in case you missed it.
4. No really, read step 2 again, it's important.
5. Having and empty plastic jug on hand for water is a nice to have
6. Don't even bother with the plastic bottles that comes with the kits.  Move right into glass
7. If you start with Mr. Beer and love it, you will quickly want to invest in a more mature kit
8. You will want to watch your beer every day, note, I didn't say need to.  You will just want to to make sure it is okay.
9. In the end, you're entire job is to make yeast cells happy.

In the end I was very happy with my first beer.  It was a style I had never had at this point (a Vienna style ale), well carbonated, and wasn't too bad.  But I know I could do better.  I quickly moved to the next step kit from Midwest Homebrew Supplies.

I did a lot of beers with honey during this phase.  I even got creative with a batch of beer, using my Mr. Beer kit to experiment.  Here is the recipe that I used:

2 Cans of Stickey Wicket Stout (from Mr. Beer)

2 Packets of Brewers Yeast

1 pouch of booster

14 oz of coconut in the fermentor

3oz. of chai tea per 22oz bottle during bottling.

Yeah.  I know it sounds a little strange, but it was one of the best beers I ever brewed.  Not enough beers utilize coconut....

So now the fire was lit.  I was beginning to understand the basics of brewing, beer styles, and proper beer handling.  It was time to see how the big boys play, it was time to start meeting the great brewers of Minnesota!

Adventures of a Beginning Homebrewer

Back in March I decided I wanted to brew myself something special for my birthday in October. I absolutely love barley wines, so I decided I would make Ol’ 76er, a barley wine named after the year I was born… Yeah, I know... I am pretty dang old. This beer was going to have a pretty big alcohol content, so it needed a bunch of yeast. I have never made a beer with this much yeast, and I was in for a surprise!

I made my wort, pitch a boat load of yeast into it, and sealed up my primary fermenter. After that it should have been just a matter of waiting… 7 months of waiting. But things didn’t go quite as smooth as I had expected. The massive amount of yeast going crazy in the fermenter caused a massive blowout! This has never happened to me before. It looked like a grizzly beer murder scene.

 

 

 

I cleaned up the mess and resealed the fermenter just to have krausen coming back through the airlock in a matter of 5 minutes. Ugh! I pulled a bit of a MacGyver and sawed the end of an airlock off so that one end would fit in the lid of the primary and one end would fit in a long tube. I then put the other end of the tube in my brew kettle with a bunch of water to create an airlock on a bigger scale. I know you can buy things like this, but I didn’t have time for a trip to the brewing supply store as I needed to get my beer sealed and hopefully safe again.

 

 

Now I am preparing to brew an imperial stout for this year’s Merry Cherry Christmas Stout. I will need to use a bunch of yeast again (although this time I am using a starter. More on that in the next post), but I don’t want the same results as I had with Ol’ 76er.

The answer, as suggested by a staff member at Northern Brewer, Fermcap! Fermcap is an anti-foaming agent that can be added to your brew so that the krausen doesn’t get out of hand. It keeps things nice and calm in the fermenter while not affecting the yeast, fermentation, or flavors. After fermentation is complete it settles to the bottom of the bucket and is left behind when racking the beer to the secondary fermenter. As an added bonus, Fermcap can also be used during the boil to eliminate boil over.

 

 

 

Hopefully my barley wine is still good after being exposed and opened for a bit. It doesn’t look infected. We will find out next month when I drink one. One thing I do know is that this isn’t going to be a problem for the imperial stout I am brewing now!

Anybody have a beer horror story like Ol’ 76er?

Adventures of a Beginning Homebrewer: Life Moves Fast!

Life Moves Fast!

 

Things have been pretty crazy lately. The summer seems to be whizzing by. Between trips to the cabin, out of town trips for my band, and BBQs with family and friends, trying to find a tiny bit of time to just breathe can be a daunting task for me. Something somewhere was going to end up suffering because of me spreading myself too thin… I am almost ashamed to admit it, but it is the homebrewing that has suffered.  

 

Towards the middle of June I brewed up a wheat beer. I had plans of making a raspberry rhubarb wheat, I guess I still do, but with the hectic pace that this summer has kept it has sat in the primary fermenter since June.  

 

I have thought about whether it is still good. It has been sealed this whole time, so contamination shouldn’t be a problem. But, can a homebrew be left sitting in the primary fermenter on the yeast and other sludge for this long? I don’t know… but I figured the internet does!

 

I perused the homebrew forums to find an answer. What I discovered is that EVERYONE has an answer…. Correction; EVERYONE has a different answer. Some say that leaving the brew on the sludge for too long will give it off flavors. Some say that leaving it in contact with the plastic bucket too long will give it off flavors. Some say that you can leave it in the primary for a couple months with absolutely no issues or off flavors. Hmmmm…. 

 

So here is what I have learned from my research: Absolutely nothing! However; with such conflicting answers I am not going to just dump 5 gallons of beer down the drain. I like beer way too much to just pitch it. It is at least worth a shot, right?  

 

Tonight the beer is going into the secondary fermenter to clear up a bit. Then I will bottle it in a couple weeks. Then after a bit of time for bottle conditioning I WILL know the answer. Hopefully the end result is an ice cold delicious fruity wheat beer! 

 

Has anybody else let their home brew timeline get away from them? I would love to read your results in the comment section below…. And stay tuned for my results.

Adventures of a Beginning Homebrewer: Upgrade to Make Life and Brew Better!

Adventures of a Beginning Homebrewer

Upgrade to Make Life and Brew Better!

So you have made a few batches of beer now with your basic brewing kit, you got the hang of it and things are tasting good. Where do you go from here? One word… Upgrades!

There are so many upgrades you can add to your home brewery to make life easier and to make brewing quicker. The list is virtually endless. I am going to concentrate on a couple of relatively inexpensive upgrades that I have made that have helped my home brewery become more efficient. After all, brewing takes time, so efficiency opens up time to make even more beer!

The very first upgrade I made to my set up was a wort chiller. After you do your boil you want to be able to get your wort temperature down below 100 as soon as you can. The longer this process takes the more susceptible your wort is to infection by bacteria and such in the air.

When I first started brewing I had a HUGE bucket that I would fill halfway with ice, then set the covered brew kettle in the ice bucket, top with ice, and then wait…. and wait… and wait… and… you get the picture. Sometimes this could take up to an hour plus! What a waste of time, not to mention I wasted a lot of cash on 20 pound bags of ice.

So, I got myself a wort chiller. A wort chiller is a coil of copper or steel tubing you set in your wort that hooks up to your faucet. Crank on the cold water and it forces the cold water through the tubes, thus chilling your wort quickly. And I mean QUICKLY! It now takes me less than 20 minutes to have my wort to a suitable temperature. My wort is in the elements for a much shorter amount of time and I can go about my day sooner… or start the next batch sooner!



There are several different types and sizes of wort chillers. You can pay anywhere from 70 to 200 bucks for one. I purchased the cheapest one I could find and it works great and has been used on countless batches of beer. If you are rich, you can get yourself the $200 model, but if you are reasonable, just get the basic one and save your cash for other upgrades.

The other upgrade I swear by is a larger siphon and hose. Most brewing kits come with a 5/16” auto siphon. But, for a mere 14 bucks and a few bucks for new hose you can get a 1/2” auto siphon. Maybe it doesn’t sound like much of a difference, but trust me when I tell you; this thing makes racking beer a breeze! It cuts the time it takes to rack beer in half. It is worth every penny, especially for a guy like me who usually has more than one batch to rack at a time.

These two upgrades probably save me about an hour per batch and they didn’t break the bank. Anybody else out there have an upgrade you have made to your brewery you can’t live without?

Cheap wort chillers: 

http://www.northernbrewer.com/shop/standard-chiller-3-8-x25-with-vinyl-tubing.html

http://www.midwestsupplies.com/stainless-steel-immersion-wort-chiller.html

Larger auto siphons:

http://www.northernbrewer.com/shop/brewing/brewing-equipment/siphoning-equipment/racking-canes/auto-siphon-1-2.html

http://www.midwestsupplies.com/1-2-auto-siphon.html

Adventures of a Beginning Home Brewer - Time for Something Completely Different

It seems a bit early, but the other day a good friend of mine and I were talking about Thanksgiving. It’s got to be the best holiday. Great food, great drinks, football, no holiday shopping; you just can’t beat it.

 

I think we all know the basics of what food will be served, but what about the beer? Many first thoughts are pumpkin beers, but truth be told I can’t stand them. Never found one I liked. Stouts and porters might be a bit heavy for the type of eating that is going to go down. How about a hard cider? Fall flavors are what Thanksgiving is all about, and what is more fall than apples?

I know, I know. Hard cider isn’t a beer. But this is Adventures of a Beginning Home Brewer. Beer isn’t even in the title… ok, so maybe it is implied since this blog is part of Beerploma, but bear with me just for one post.

 

It became apparent that it's time to make a tasty hard cider. But of course, I am a beginner and have no clue how to make a hard cider. Ahhhh… Isn’t the internet great? I did some research and found out some basics.

 

The first tip I found is that there is no boil for hard cider as there is in beer. If you boil apple juice it can take on a bit of an astringent flavor. But no boil = potential contamination of the cider. I found two ways to combat this.

 
The first way is to purchase unpasteurized juice (or buy apples and juice them) and heat the juice, but not boil it. This can make things sterile, but you must be careful. Over do it and you have an off taste in your cider. Under do it and you may get some contaminated cider. Nether sound good to me!
 
The second way is the way chosen for this experiment. Purchase pasteurized apple juice. This makes it free from contaminants while keeping the juice in its same tasty condition. Be sure to purchase a good pasteurized cider that contains no chemical preservatives like potassium sulfate or sodium benzoate. These things prevent bacteria and mold growth, but also prevent yeast growth. In other words, your yeast won’t work with juice containing chemical preservatives. And if the yeast doesn’t work, you don’t have hard cider.
 

For the yeast, most will work. The guy at Northern Brewer suggested champagne yeast. It will eat a ton of sugar and carbonates well in the end. And it won’t deliver an overly yeasty flavor that may be tasty in some beers, but probably wouldn’t be too great in a hard cider.

 

After figuring that stuff out making hard cider, at least to the primary stage, is a piece of cake! Pour pasteurized apple juice into a fermenter, add yeast, and seal! The part that took the longest was sanitizing. But since I was also firing up a raspberry rhubarb wheat and bottling an EPA, it really took no extra time to sanitize a bucket, top, and airlock.

As of this morning it was bubbling away in the primary, so that’s a good sign things are headed in the right direction. I will follow up on this cider later down the road as developments come about. Have you brewed a hard cider, and if so how did it go? Any advice would be greatly appreciated.

Adventures of a Beginning Home Brewer

Double Vision

A couple months ago I upgraded my brewery. I got the equipment so that I can brew two batches of beer at the same time. I like beer a lot, which means I need a lot of beer!

 

I started things off by brewing a raspberry wheat and an english brown ale. Things were going great; I was excited about the fact that I would soon have a boatload of beer… And then came an obstacle.

 

I realized after racking the beer into the secondary fermenters that I had a small problem; I never labeled the beers when I first started them and put them into the fermenters. Duh! Normally you would think that these beers would have a distinctively different color from each other, but that isn’t completely the case. When you have about 5 gallons of beer in a big glass vessel the color is pretty much just “dark.”

 

The raspberry is put in during the bottling, which complicated things two fold. First, there isn’t the obvious clue of the beer tasting or smelling like raspberries. Secondly, it left the door open that I could very well end up with a raspberry english brown ale and a plain wheat beer.

 

My friend and I had to taste the flat beer, smell it, and examine it in a smaller taster glass… And then we had to make our best guest. We racked what we thought was the brown ale and bottled it and then racked what we thought was the raspberry wheat, poured in the raspberry extract, and bottled that. Then the long two week wait until we could find out if we guessed right started.

 

The result? We guessed right! Whew! And they are both pretty good beers. Lesson learned: LABEL YOUR BEERS!

Adventures of a Beginning Home Brewer: The Outcomes

It has been a bit since I have had time to post anything on here. But don’t think I haven’t been brewing! Since I have blogged about the Merry Cherry Christmas Stout and the caramel mocha porter, which I dubbed Red Eye Porter, I figured an update on how they turned out was in order.

  

This year's Merry Cherry Christmas Stout turned out pretty good. It was very dark, but had a somewhat light taste to it for a stout. The cherries came through pretty well which added a sweetness to it that was very enjoyable. This stout came out a bit overly carbonated when compared to a typical stout. I think the lightness, sweet cherry taste, and the slightly over carbonation really made this beer what I wanted it to be; a beer everyone can enjoy together for the holidays, even the light beer drinkers. Sadly this drinkability has made it so this beer is completely gone… I already can’t wait for Christmas!

 

Red Eye Porter, which was my first 100% original recipe, came out great! The espresso really came through in this one. It is a big dark porter with about the perfect amount of carbonation in it. For a dark coffee type porter it was really drinkable. Every time I cracked some open for friends we all wanted another! The roasted chocolate malts added decent chocolate flavor. My only complaint would be the caramel didn’t quite do what I was hoping for. With the caramel grains and the caramelized sugar I made, you could taste the sweetness, but not quite enough of the roasted burnt type caramel flavor I really wanted it to have. All said though, this is the best beer I have made so far. Again, I must have done a good job as I am out! (Don’t worry Will, still have a bomber squirreled away for you)

 

 

All in all, two pretty darn good beers!